English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Product introduction:
The 1400℃ atmosphere sintering furnace uses silicon carbide rods as heating elements, which can achieve rapid heating; the furnace body adopts a double-layer furnace shell structure, equipped with an air cooling system, and the surface temperature of the furnace shell is low; the furnace door and roof use high-temperature silicon rubber Sealed, both pre-vacuum and protective atmosphere can be introduced; the furnace material is made of high-quality alumina polycrystalline fiber vacuum adsorption, which is heat preservation and energy saving.
Main application:
1400℃ atmosphere sintering furnace is suitable for high temperature sintering, metal annealing, new material development, organic matter ashing, quality inspection and small batch production in universities, scientific research institutes, industrial and mining enterprises.
Technical Parameters:
The 1400℃ atmosphere sintering furnace uses silicon carbide rods as heating elements, which can achieve rapid heating; the furnace body adopts a double-layer furnace shell structure, equipped with an air cooling system, and the surface temperature of the furnace shell is low; the furnace door and roof use high-temperature silicon rubber Sealed, both pre-vacuum and protective atmosphere can be introduced; the furnace material is made of high-quality alumina polycrystalline fiber vacuum adsorption, which is heat preservation and energy saving.
Main application:
1400℃ atmosphere sintering furnace is suitable for high temperature sintering, metal annealing, new material development, organic matter ashing, quality inspection and small batch production in universities, scientific research institutes, industrial and mining enterprises.
Technical Parameters:
| product name | 1400℃ Atmosphere Sintering Furnace |
| Product number | KJ-A1400-80LZ |
| Shell structure | Double-layer air-cooled structure, electrostatic spray |
| Furnace size | 400×400×500mm Customizable |
| Maximum temperature | 1400°C |
| Operating temperature | ≤1300℃ |
| Furnace material | High quality alumina polycrystalline fiber |
| Temperature control method | Using PID controller, intelligent 30-segment programmable control |
| Heating rate | 0-10℃/min |
| Heating element | Silicon carbide rod |
| Thermocouple | S type armored thermocouple |
| Door opening method | Sideways |
| Inlet and outlet | One air inlet, one air outlet (and vacuum pump suction port) |
| Accessible atmosphere | Inert gas such as nitrogen and argon (slightly positive pressure) |
| Vacuum | Mechanical pressure vacuum gauge can reach -0.1MPA |
| Warranty | 1 year warranty (except for vulnerable parts and man-made damage) |
